Advanced searches left 3/3
Search only database of 7.4 mil and more summaries

Level Sensor Level Sensor Tape

Summarized by PlexPage
Last Updated: 21 November 2020

* If you want to update the article please login/register

General | Latest Info

8 / 124mm Width: 1. 1 thickness: 0. 015 / 0. 381mm resistance Gradient: 150 / inch 60 ohms / cm substrate: Polyethylene Terephthalate PET actuation Depth: Nominal 1 25. 4mm resolution: < 0. 01 0. 25 mm temperature Range: 15F-150F-9C-65C For more information, check out: eTape Liquid Level Sensor Datasheet. We don't have a detailed tutorial for this Sensor but it acts very much like a thermistor, so we suggest checking out that tutorial for background, and then following these instructions: Connect pin 2 of Sensor to ground, then pin 3 to 560 ohm resistor. Other side of 560 ohm resistor to VCC 3. 3V or 5V, for example, to create a resistor divider. The ADC pin connects to point between resistor and Sensor. Product Dimensions: 165. 0mm x 25. 0mm x 0. 8mm / 6. 5 x 1. 0 x 0.

* Please keep in mind that all text is machine-generated, we do not bear any responsibility, and you should always get advice from professionals before taking any actions.

* Please keep in mind that all text is machine-generated, we do not bear any responsibility, and you should always get advice from professionals before taking any actions

Description

Table

PDFPart
LLTM-2000-SB

These convenient fully mechanical tank level indicators are ideal for storage tanks and transportable containers. They are easy to operate and offer closed system for containers, which are transported frequently. Operating Principle tank Level reading is done by slowly pulling tape measure out of the stem. When liquid level point is reach, tape locks-in at position of internal float. The Tank level measurement is then read directly off tape measure. After reading is take, tape is securely stored back inside the stem. These indicators are available up to 60 long in all Stainless Steel, Stainless and Buna or Polypropylene. Threaded connection is standard 2 NPT pipe fitting.

* Please keep in mind that all text is machine-generated, we do not bear any responsibility, and you should always get advice from professionals before taking any actions.

* Please keep in mind that all text is machine-generated, we do not bear any responsibility, and you should always get advice from professionals before taking any actions

logo

Plex.page is an Online Knowledge, where all the summarized are written by a machine. We aim to collect all the knowledge the World Wide Web has to offer.

Partners:
Nvidia inception logo
jooble logo

© All rights reserved
2021 made by Algoritmi Vision Inc.

If your domain is listed as one of the sources on any summary, you can consider participating in the "Online Knowledge" program, if you want to proceed, please follow these instructions to apply.
However, if you still want us to remove all links leading to your domain from Plex.page and never use your website as a source, please follow these instructions.